 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| T2800D Triacs Silicon Bidirectional Thyristors Designed primarily for full-wave ac control applications, such as light dimmers, motor controls, heating controls and power supplies. Features http://onsemi.com * Blocking Voltage to 400 V * All Diffused and Glass Passivated Junctions for Greater Parameter * Small, Rugged, Thermowatt Construction for Low Thermal Resistance, High Heat Dissipation and Durability Uniformity and Stability TRIACS 8 AMPERES RMS, 400 VOLTS * Four Quadrant Gating * Pb-Free Package is Available* MAXIMUM RATINGS (TJ = 25C unless otherwise noted) Rating Peak Repetitive Off-State Voltage (Note 1) (TJ = -40 to +125C, Gate Open) On-State RMS Current (All Conduction Angles, TC = +80C) Peak Non-Repetitive Surge Current (One Full Cycle Sine Wave, 60 Hz, TJ = +80C) Circuit Fusing Consideration (t = 8.3 ms) Peak Gate Power (Pulse Width = 10 ms, TC = +80C) Average Gate Power (t = 8.3 ms, TC = +80C) Peak Gate Current (Pulse Width = 10 ms, TC = +80C) Operating Junction Temperature Range Storage Temperature Range Symbol VDRM, VRRM IT(RMS) ITSM I2t PGM PG(AV) IGM TJ Tstg Value 400 8.0 100 40 16 0.35 4.0 -40 to +125 -40 to +150 Unit V MT2 G MT1 MARKING DIAGRAM 4 A A A2s W W A C C A Y WW G = Assembly Location = Year = Work Week = Pb-Free Package TO-220AB CASE 221A STYLE 4 1 2 3 T2800DG AYWW Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. VDRM and VRRM for all types can be applied on a continuous basis. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. PIN ASSIGNMENT 1 2 3 4 Main Terminal 1 Main Terminal 2 Gate Main Terminal 2 ORDERING INFORMATION Device T2800D T2800DG *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. (c) Semiconductor Components Industries, LLC, 2006 Package TO-220AB TO-220AB (Pb-Free) Shipping 500 Units/Box 500 Units/Box 1 May, 2006 - Rev. 5 Publication Order Number: T2800/D T2800D THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction-to-Case Maximum Lead Temperature for Soldering Purposes 1/8 from Case for 10 Sec Symbol RqJC TL Value 2.2 260 Unit C/W C ELECTRICAL CHARACTERISTICS (TC = 25C unless otherwise noted; Electricals apply in both directions) Characteristic OFF CHARACTERISTICS Peak Repetitive Blocking Current (VD = Rated VDRM, VRRM; Gate Open) TC = 25C TC = 100C ON CHARACTERISTICS Peak On-State Voltage (Note 2) (IT = "30 A Peak) Gate Trigger Current (Continuous dc) (VD = 12 Vdc, RL = 100 W) MT2(+), G(+) MT2(+), G(-) MT2(-), G(-) MT2(-), G(+) Gate Trigger Voltage (Continuous dc) (All Quadrants) (VD = 12 Vdc, RL = 100 W) Gate Non-Trigger Voltage (Continuous dc) (VD = 12 V, RL = 100 W, TC = 100C) Holding Current (VD = 12 Vdc, Initiating Current = "200 mA, Gate Open) Gate Controlled Turn-On Time (VD = Rated VDRM, IT = 10 A, IGT = 80 mA, Rise Time = 0.1 ms) DYNAMIC CHARACTERISTICS Critical Rate-of-Rise of Commutation Voltage (VD = Rated VDRM, IT(RMS) = 8 A, Commutating di/dt = 4.1 A/ms, Gate Unenergized, TC = 80C) Critical Rate-of-Rise of Off-State Voltage (VD = Rated VDRM, Exponential Voltage Rise, Gate Open, TC = 100C) 2. Pulse Test: Pulse Width 2.0 ms, Duty Cycle 2%. dv/dt(c) - 10 - V/ms VGT VGD IH tgt VTM IGT - - - - - 0.2 - - 10 20 15 30 1.25 - 15 1.6 25 60 25 60 2.5 - 30 - V V mA ms - 1.7 2.0 V mA IDRM, IRRM - - - - 10 2.0 mA mA Symbol Min Typ Max Unit dv/dt 60 - - V/ms Voltage Current Characteristic of Triacs (Bidirectional Device) + Current Quadrant 1 MainTerminal 2 + Symbol VDRM IDRM VRRM IRRM VTM IH Parameter Peak Repetitive Forward Off State Voltage Peak Forward Blocking Current Peak Repetitive Reverse Off State Voltage Peak Reverse Blocking Current Maximum On State Voltage Holding Current Quadrant 3 MainTerminal 2 - IH VTM IRRM at VRRM on state IH VTM off state + Voltage IDRM at VDRM http://onsemi.com 2 T2800D Quadrant Definitions for a Triac MT2 POSITIVE (Positive Half Cycle) + (+) MT2 (+) MT2 Quadrant II (-) IGT GATE MT1 REF (+) IGT GATE MT1 REF Quadrant I IGT - (-) MT2 (-) MT2 + IGT Quadrant III (-) IGT GATE MT1 REF (+) IGT GATE MT1 REF Quadrant IV - MT2 NEGATIVE (Negative Half Cycle) All polarities are referenced to MT1. With in-phase signals (using standard AC lines) quadrants I and III are used. TC, MAXIMUM ALLOWABLE CASE TEMPERATURE (C) P(AV) , AVERAGE POWER DISSIPATION (WATTS) 100 12 10 8 6 4 2 0 95 90 FULL CYCLE SINUSOIDAL WAVEFORM FULL CYCLE SINUSOIDAL WAVEFORM MAXIMUM TYPICAL 85 80 0 2 4 6 8 0 2 4 6 8 10 12 IT(RMS), RMS ON-STATE CURRENT (AMP) IT(RMS), RMS ON-STATE CURRENT (AMP) Figure 1. Current Derating Figure 2. Power Dissipation http://onsemi.com 3 T2800D PACKAGE DIMENSIONS TO-220 CASE 221A-07 ISSUE AA -T- B F C SEATING PLANE T S NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. DIM A B C D F G H J K L N Q R S T U V Z INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.095 0.105 0.110 0.155 0.014 0.022 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 --- --- 0.080 MILLIMETERS MIN MAX 14.48 15.75 9.66 10.28 4.07 4.82 0.64 0.88 3.61 3.73 2.42 2.66 2.80 3.93 0.36 0.55 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 --- --- 2.04 4 Q 123 A U K H Z L V G D N J R STYLE 4: PIN 1. 2. 3. 4. MAIN TERMINAL 1 MAIN TERMINAL 2 GATE MAIN TERMINAL 2 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative http://onsemi.com 4 T2800/D |
Price & Availability of T2800D06
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |